Technical FAQ

1. Go to Ports - Physical Ports in Expert mode, select a port to modify and click the Modify Selected Ports button.

2. Choose your connection protocol.

3. Enter the name you want associated to that port in the Alias field.

4. To change the baud rate, select an option from 2400 to 921600 Kbps from the Baud Rate pulldown menu. The default is 9600.

5. To change the flow control, select None, Hardware or Software from the Flow Control pulldown menu. The default is None.

6. To change the parity, select None, Odd or Even from the Parity pull-down menu. The default is None.

7. To change the data size, select an option from 5 to 8 from the Data pull-down menu. The default is 8.

8. To change the stop bits, select 1 or 2 from the stop bits pull-down menu. The default is 1.

9. To change whether the DCD (Data Carrier Detect) State is disregarded or not, select either Disregard or Regard.

10. Click “Done”.

11. Click “apply changes”.