 |
KVM on the NET™
High Density KVM Swith
KVM LCD Console Switch
Matrix KVM Switch
CL1000M LCD
|
|
Altusen KVM LCD Console Switch
Requirements
- The following equipment must be installed on each computer: VGA, SVGA or Multisync card;
(Note: Since the integrated LCD monitor’s maximum resolution is 1024 x 768, make sure that the computer resolution settings do not exceed 1024 x 768.)
6-pin mini-DIN (PS/2 style) mouse port;
Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port with +5V DC on pin 5 and ground on pin 4
- For USB computers: USB to PS/2 adapters are required.
- For SUN servers: Servers with VGA and PS/2 connections (such as the SUN Cobalt)are supported; the legacy 13W3 SUN servers require additional adapters. The Spac SUN workstation with USB connection is supported with an additional adapter.
- Cables: For optimum signal integrity and to simplify the layout, we strongly recommend that you use the following high quality Altusen Custom Cables
- Altusen KVM to computers: 2L5202P - 6 ft, 2L5203P - 10 ft, 2L5206P - 20 ft
- Altusen KVM to Altusen KVM (Daisy Chaining): 2L1700 - 2 ft, 2L1701 - 6ft
- Note:
1. KL0116 does not support serial mice. You cannot use Serial-to-PS/2 adapters with the extender cables
2. If your computer uses an AT style keyboard socket you will need to purchase a STANDARD PS/2-to-AT keyboard adapter, in order to plug the cable into keyboard port of the computer
Specifications
| Power Supply |
AC 110 - 240V, 50/60HZ |
PC Connections:
Direct
Daisy Chain |
16
512 |
| Port Selection |
OSD/Hotkey |
| Connectors: |
| Computer |
16 x SPDB-15F (yellow) |
| Chain Out |
1 x DB-25M (black) |
| Upgrade |
1 x RJ-11F (black) |
| Remote |
1 x RJ-45F (black) |
| Power |
1 x AC input F (black) |
| Buttons: |
| LCM Adjustment |
4 x round, black @ keyboard module |
| LCM Power |
1 x semi-hidden, black @ keyboard module |
| Reset |
1 x semi-hidden, black @ LCM module |
| Local/Remote Switch |
1 x round, black @ keyboard module |
| Switches: |
| Power |
1 x rocker @ rear |
| Upgrade Recovery |
1 x slide @ rear |
| LED: |
| Power |
1 x blue @ front |
| On Line |
16 x green @ LCM module |
| Selected |
16 x orange @ LCM module |
| Local Console |
1 x green @ K/B module |
| Remote Console |
1 x orange @ K/B module |
| Emulation: Keyboard and Mouse |
PS/2 |
| Scan Interval |
1 - 255 seconds |
| Resolution |
1024 x 768, DDC2B |
| Operating Temperature |
0°C to 50°C |
| Storage Temperature |
-20°C to 60°C |
| Humidity |
0% to 80% RH, NC |
| Enclosure |
Metal |
| Weight |
30 lbs |
| Dimmensions |
6" x 28.5" x 23.5" |
|
|
|
