 |
KVM on the NET™
High Density KVM Swith
KVM LCD Console Switch
Matrix KVM Switch
CL1000M LCD
|
|
Altusen High Density KVM
Requirements
- Console:VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation, PS/2 mouse, PS/2 keyboard.
- The following equipment must be installed on each computer: VGA, SVGA or Multisync card; 6-pin mini DIN (PS/2) port; Either a 6-pin mini DIN (PS/2) keyboard port, or a 5-pin DIN (AT) keyboard port.
- For USB computers: USB to PS/2 adapters are required.
- For SUN servers: Servers with VGA and PS/2 connections (such as the SUN Cobalt)are supported; the legacy 13W3 SUN servers require additional adapters. The Spac SUN workstation with USB connection is supported with an additional adapter.
- Cables: For optimum signal integrity and to simplify the layout, we strongly recommend that you use the following high quality Altusen Custom Cables
- Altusen KVM to computers: KC5201P - 4', KC5202P - 6', KC5203P - 10
- Altusen KVM to Altusen KVM (Daisy Chaining): KC1700 - 2', KC1701 - 4'
- Note:
1. KL0116 does not support serial mice. You cannot use Serial-to-PS/2 adapters with the extender cables
2. If your computer uses an AT style keyboard socket you will need to purchase a STANDARD PS/2-to-AT keyboard adapter, in order to plug the cable into keyboard port of the computer
Specifications
| Power Supply |
AC 110 - 240V, 50/60HZ |
PC Connections:
Direct
Daisy Chain |
16
512 |
| Port Selection |
OSD/Hotkey |
| Connectors: |
| Console VGA |
HDB-15 female x 1 |
| Console K/M |
Mini-Din 6 female x 1 purple for keyboard (PS/2)
Mini-Din 6 female x 1 green for mouse (PS/2) |
| Computer |
16 x SPDB-15F |
| Chain Port |
1 x DB-25F @ upper, 1x DB25M @ lower |
| Upgrade |
RJ-11(6 pins) x 1 @ front |
| Remote |
RJ-45 x1 @ front |
| Power |
AC power socket x 1 |
| Switches: |
| Power |
Rocker switch x 1 |
| Upgrade Recovery |
Slide switch x 1 |
| LED: |
| Power |
1 x blue @ front |
| On Line |
16 x green @ front |
| Selected |
16 x orange @ front |
| 7-Segment |
2 x yellow @ front |
| Local Console |
1 x green @ front |
| Remote Console |
1 x orange @ front |
| Local/Remote Switch |
Round button x 1 @ front panel |
| Emulation: Keyboard and Mouse |
PS/2 |
| Scan Interval |
1 - 255 seconds (default:5) |
| Resolution |
1920 x 1440, DDC2B |
| Operating Temperature |
0°C to 50°C |
| Storage Temperature |
-20°C to 60°C |
| Humidity |
0% to 80% RH, NC |
| Enclosure |
Metal |
| Weight |
7.8 lbs |
| Dimmensions |
8.4" x 1.75" x 17" |
|
|
|
