1-877-MIRAPATH – 1-877-647-2728 | Contact
- Home
- Solutions
-
Products
- Branch Office Manager
- Console Servers
- Cooling
- Data Center Infrastructure Management (DCIM)
- Environmental Monitoring
- Infrastructure Management
- KVM Switches
- Lab Automation
- Network Cables & Power Cords
- Power Distribution Units
- Power Management Software
- Rackmount LCD Monitors
- Racks & Accessories
- UPS Systems
- Knowledge Center
- Support
- About Mirapath
Knowledge Center 
Technical FAQ Cyclades ACS 10 – How do I setup authentication for serial port access? (fw V_3.2.1-2)
Technical FAQ Cyclades ACS 10 – How do I setup authentication for serial port access? (fw V_3.2.1-2)
10 – How do I setup authentication for serial port access? (fw V_3.2.1-2)
Answer
1. Go to Ports - Physical Ports in Expert mode, select the port or ports to modify then click “Modify Selected Ports”.
2. Click the Access tab.
3. To select an authentication method, select one of the options in the Type menu.
4. Click “Done”.
5. Click “apply changes”.
6. Make sure that an authentication server is specified for the selected authentication type. (Refer to the ACS user guide at ftp://ftp.avocent.com/public/product-upgrades/$DS1800/ACS/ACS_3.2.1/Cyclades_ACS_Admin.Install.Users_Guide_V3.2.1.pdf. Pages 117 to 124.)
