Call toll free: 877-647-2728
Mon - Fri 6:00am - 6:00pm PST
email: info@mirapath.com
Central Management
DSView 3 Software

KVM over IP
DSR - KVM over IP
     DSR1021
     DSR1022
     DSR1024
     DSR1031
     DSR1020
     DSR2020
     DSR4020
     DSR8020
     DSR1030
     DSR2030
     DSR2035
     DSR4030
     DSR8030
     DSR8035

Service Processor Management
MergePoint 5200
MergePoint 5224/5240

Analog
AMX

AutoView


Cyclades Line

Promotion of the Month

 

Avocent DSR2030 KVM Switch

Frequently Asked Questions

Question
Answer
Equipment
I have computers at multiple sites. How do I use the Avocent DSR switch to provide access? The DSR® switch can be deployed wherever computers or servers are located. It connects to your network. Your technicians and administrators can access the attached devices directly from their desk.
Can the DSR switch provide access to other devices? The DS Series has a wide variety of connection adaptors. Use the VT100 serial adaptor to access routers, DSU or other networking devices.
How do I get access if my network connection to a site is down? The DSR switch has a port that can be connected to a modem. This provides access to the site when the IP connection is not working. By connecting the router or DSU to the DSR switch, you can diagnose WAN or server problems.
Operation
I use remote control software to manage my remote locations. How is your solution different? The DSR switch connects to the keyboard, video and mouse port of the computer. Unlike remote control software, the DS Series products do not require a functioning operating system, network stack, or application to be running to access the computer. By connecting externally, a CTRL-ALT-DEL command can be sent to reboot the computer. During the boot up, the BIOS can be accessed or the boot can be single-stepped in order to troubleshoot boot problems. Remote control software cannot give boot level access.
Sometimes I need to cycle power to a device to reset it. How do I cycle power remotely? The DSR2030 switch has a built-in power control port. By connecting this port to an Avocent SPC power control device, you can remotely check power starts and cycle power. This eliminates calling someone at the location to explain which power switch they need to cycle.
Performance
Depending on my site, my link speeds can be different. How does the DSR1020 switch handle different speeds? The DSR1020 switch uses the Avocent Dambrackas Video Compression® (DVC) algorithm. It provides selections to reduce the number of colors, including a gray scale selection, to operate over a variety of link speeds including speeds of a dial modem.


Avocent DSR2030 KVM Swtich
Overview
Features and Benefits
Specifications
DSView 3 Details
FAQs
Part Numbers
 
Customers who use this product also purchased:

Cyclades ACS
Cyclades PM
 
For technical question visit our forum:

www.forum.mirapath.com
 
© 2003-2008 Mirapath, Inc. | 10268B Bandley Dr., Cupertino, CA 95014 | T: (408) 873-0881 | F: (408) 521-0520
Terms of Use | Privacy Policy